Home » Tools
Tools
- Clare
- Cree
- Linear Technology
- Maxim
- Microsemi
- MPS
- ON Semiconductor
- Power Integrations
- STMicroelectronics
- Texas Instruments
MXHV9910 is a low-cost, high-brightness (HB) LED driver manufactured using Clare's high-voltage BCDMOS on SOI process. The driver has internal circuitry that allows it to operate from a universal...
MXHV9910 is a low-cost, high-brightness (HB) LED driver manufactured using Clare's high-voltage BCDMOS on SOI process. The driver has internal circuitry that allows it to operate from a universal...
Clare's CPC9909 Evaluation Board contains all the necessary circuitry to demonstrate all the features of CPC9909 High Brightness (HB), Off-Line LED driver. The CPC9909 IC architecture includes pulse...
Cree LED Modules provide a simple solution for lighting designers and manufacturers to adopt best in class LED lighting from Cree.
Demonstration circuit 1775A is an off-line isolated flyback LED driver featuring the LT®3799. The demo board provides a constant-current output of 0.5A over an LED string voltage of 20V and...
Demonstration circuit 1511A-B features the LTM®8042-1 which is a complete 350mA μModule LED driver.
Demonstration circuit 1511A-A features the LTM®8042 which is a complete 1A μModule LED driver.
Demo circuit DC1274A features the LTM®8040 36V, 1A step-down constant current μModule® LED driver. The demonstration circuit is designed to drive a single LED or string of LEDs at up to...
Demonstration circuit 850A is a 3V-14.4Vin, Boost LED Driver featuring the LTC3783 - a high PWM dimming ratio capable, LED driver controller. This circuit was designed to attain a highly...
Demonstration circuit 1607 is a multioutput power supply with a pushbutton controller and a dual string LED driver featuring the LTC®3675. The LTC3675 has four synchronous buck regulators, a...
Demonstration circuit 762 is a 350mA, 1W white LED driver featuring the LTC®3490 and a Lumileds Luxeon LED and lens. The board comes with two AA alkaline battery cells to be stuffed in the...
Demonstration circuit 875 is a high efficiency buckboost flash LED driver featuring the LTC3454EDD. The board has two circuits optimized for different applications: a small footprint solution...
Demonstration circuit 810 is a high efficiency buckboost flash LED driver featuring the LTC®3453 and the LXCL-PWF1 Lumileds Luxeon Flash. The board is optimized for 500mA 300ms LED flash...
Demonstration circuit 928 is a SYNCHRONOUS BUCK-BOOST MAIN/CAMERA WHITE LED DRIVER featuring the LTC3452EUF.
Demonstration circuit 1217 is a 5-LED Main/Sub Display Driver with Dual LDO featuring the LTC3230.
Demonstration circuit 1265 is a 360mA Universal 18-Channel LED Driver with twelve white LEDs and two RGB LEDs featuring the LTC3220/LTC3220-1.
Demonstration circuit 1265 is a 360mA Universal 18-Channel LED Driver with twelve white LEDs and two RGB LEDs featuring the LTC3220/LTC3220-1.
Demonstration circuit 1055 is a 250mA Universal Nine Channel LED Driver with two RGB displays and three white LEDs featuring the LTC3219.
Demonstration circuit 1030 is a 400mA Single Wire Camera LED Charge Pump featuring the LTC3218. This circuit will provide 50mA of continuous torch current or a flash current at 300mA or 400mA. The...
Demonstration Circuit 909 is a Multi-LED Camera Light Charge Pump featuring the LTC3217.
Demonstration circuit 805 is a low noise high current LED charge pump featuring the LTC®3216 and the LXCL-PWF1 Lumileds Luxeon Flash. The board is optimized for 800mA 300ms LED flash current...
Demonstration circuit 871 is a low noise high current LED charge pump featuring the LTC®3215 and a cell phone camera flash LED. The board has three versions (-A, -B, -C) that are optimized...
Demonstration circuit 871 is a low noise high current LED charge pump featuring the LTC®3215 and a cell phone camera flash LED. The board has three versions (-A, -B, -C) that are optimized...
Demonstration circuit 871 is a low noise high current LED charge pump featuring the LTC®3215 and a cell phone camera flash LED. The board has three versions (-A, -B, -C) that are optimized...
Demonstration circuit 902 is a low noise high current LED charge pump featuring the LTC®3214 and a cell phone camera flash LED.
Demonstration circuit 902 is a low noise high current LED charge pump featuring the LTC®3214 and a cell phone camera flash LED.
Demonstration circuit 1187 is an RGB LED Driver and Charge Pump featuring the LTC3212.
Demonstration circuit 1071 is a multi-display LED controller featuring the LTC3210-3.
Demonstration circuit 1071 is a multi-display LED controller featuring the LTC3210-2.
Demonstration circuit 1022 is a multi-display LED controller featuring the LTC3210-1.
Demonstration circuit 914 is a multi-display LED controller featuring the LTC3210.
Demonstration circuit 881 is a multi-display LED controller featuring the LTC3209-1.
Demonstration circuit 880 is a multi-display LED controller featuring the LTC3209-2.
Demonstration circuit 824 is a multi-display LED controller featuring the LTC3208.
Demonstration circuit 1039 is a 600mA Universal Multi-Output LED/CAM Driver with six white LEDs, two RGB LEDs, and a camera flash featuring the LTC3207/LTC3207-1.
Demonstration circuit 1039 is a 600mA Universal Multi-Output LED/CAM Driver with six white LEDs, two RGB LEDs, and a camera flash featuring the LTC3207/LTC3207-1.
Demonstration circuit 749 is a multi-display LED controller featuring the LTC3206.
Demonstration circuit 629 is a multi-display LED controller featuring the LTC3205.
Demonstration circuit 633 is easily setup to evaluate the high efficiency of the LTC3202, low noise white LED driver circuit.
DC395A is set up to easily evaluate the LTC3202 high efficiency, low noise white LED driver circuit.
DC381A is used to evaluate the LTC3201 low noise charge pump LED driver.
DC366A is set up to easily evaluate the LTC3200 low noise charge pump.
This demonstration circuit showcases the LT8500, a 48-channel LED driver with a PWM generator and serial interface. It operates from a 30V to 45V input power supply and drives 48 channels of LED...
Demonstration circuit 1521A is a high voltage monolithic LED driver with an integrated 3.3A, 84V power switch. The demonstration circuit is assembled as a boost topology from 6V-80V* input and up...
Demonstration circuit DC1666A is a synchronous fourswitch buck-boost LED driver controller. It accepts an input voltage from 4.7V to 60V, and drives up to 25V of LEDs at 2A. DC1666A features both...
DC1573A is an 8-Channel 100mA High Voltage LED Driver featuring the LT®3760. The LT3760 drives up to 100mA per string and has a maximum LED string voltage of 45V. DC1573A is set at 1MHz...
Demonstration circuit 1268B-B is a high voltage and high current LED driver controller. The VIN pin input voltage is as high as 40V. The LED output voltage on this board is as high as 60V but...
Demonstration circuit 1268B-A is a high voltage and high current LED driver controller. The VIN pin input voltage is as high as 40V. The LED output voltage on this board is as high as 60V but can...
DC1436A is a 16-Channel High Voltage LED Driver featuring the LT3754. The LT3754 drives up to 50mA per string and has a maximum LED string voltage of 45V. DC1436A is set at 1MHz switching frequency...
Demonstration circuit 1406A features the LT®3746, 32-channel 20mA LED driver with buck controller and serial interface. Each channel has an individually adjustable 12-bit (4096-step) grayscale...
Demonstration circuit 590B is a USB-based controller with generic Serial Peripheral Interface (SPI) and Inter Integrated Circuit (I2C™) ports. It is designed to mate with Linear...
Demonstration circuit 1608A features the LT®3745, 16-channel 50mA LED driver with buck controller and serial interface. Each channel has an individually adjustable 12-bit (4096-step)...
Demonstration circuit 1602 is a High Power Constant Current, Constant Voltage Synchronous Buck Controller featuring the LT3741. The demo board is optimized for 20A output from a 12V input. Being...
Demonstration circuit 1285 is a 6-String 30mA LED Driver with 1.5% Current Matching featuring the LT3598. The LT3598 is a step-up DC/DC converter designed to drive up to 6-strings of LEDs at an ...
Demonstration circuit 1497A is a 60V triple step-down LED driver featuring the LT3597. The demo board is optimized for 9 white LEDs, 100mA output per regulator from a 48V input.
Demonstration circuit 1542 is a 60V Step-Down 3- Channel LED Driver featuring the LT3596. The demo board is optimized for 8 LEDs, 100mA output per channel from a 48V input.
Demonstration circuit 1199A is a 16-Channel Buck Mode LED Driver featuring the LT®3595EUHH. The circuit is optimized to drive 16 channels of three series LEDs at 30mA. Each channel has three...
Demonstration circuit 1224 is a LED Driver with One Wire Control and Output Disconnect featuring the LT3593. The LT3593 is a step-up current mode DC/DC converter designed to drive up to 10 white ...
Demonstration circuit 1205A features the LT3592 36V step-down 500mA LED driver with 10:1 dimming. The demonstration circuit is designed to drive two red 500mA LEDs mounted on the PCB from a wide...
Demonstration circuit 1124 is an LED Driver with Integrated Schottky in 3mmx2mm DFN featuring the LT3591.
Demonstration circuit 1166 is a 48V Buck-Mode LED Driver featuring the LT3590. The LT3590 is a fixed frequency buck mode converter specifically designed to drive up to 10 LEDs in series from a ...
Demonstration Circuit 1612A is a fully integrated LED driver with 750mA switch current featuring the LT®3519-1/LT3519-2. The board is optimized to drive an LED string of up to 16V at 150mA in...
Demonstration Circuit 1612A is a fully integrated LED driver with 750mA switch current featuring the LT®3519-1/LT3519-2. The board is optimized to drive an LED string of up to 16V at 150mA in...
Demonstration Circuit 1482 is a fully integrated LED driver with 750mA switch current featuring the LT®3519. The board is optimized to drive a 100mA LED string between the input voltage and...
Demonstration circuit 1160 is a full-featured LED driver with 2.3A switch current featuring the LT®3518. The board is optimized to drive a 330mA LED string with a total LED voltage between the...
Demonstration Circuit 1279 is a full-featured LED driver with 1.5A switch current featuring the LT®3518. The board is optimized to drive a 330mA LED string with a total LED voltage between ...
Demonstration circuit 1019A is a Dual White LED Driver Converter featuring the LT®3497 in a 3mm x 2mm DFN package. The demo circuit demonstrates small size and low component count in two...
Demonstration circuit 986 is a Triple Step-Down LED driver featuring the LT3496EUFD.
Demonstration circuit 1288 is a Triple Boost or Buck-Boost LED Driver featuring the LT3496EUFD. The LT3496 is a triple output DC/DC converter designed to operate as current sources for driving...
Demonstration circuit 1405 is a Triple Boost or Buck/Boost LED Driver featuring the LT3492. The LT3492 is a triple output DC/DC converter designed to operate as current sources for driving LEDs.
Demonstration circuit is a LED Driver in SC70 With Built-in Schottky featuring the LT3491.
Demonstration circuit 876 is a dual 1.3A white LED step-up converter with wide dimming range featuring the LT3486. The board is optimized to drive a string of six, eight, or ten white LEDs at...
Demonstration circuit 949A-A/949A-B is a 4.5A peak switch current boost LED driver with PWM dimming featuring the LT3478-1/LT3478. DC949A-A uses the LT3478-1, a fixed 1A LED driver with the LED...
Demonstration circuit 949A-A/949A-B is a 4.5A peak switch current boost LED driver with PWM dimming featuring the LT3478-1/LT3478. DC949A-A uses the LT3478-1, a fixed 1A LED driver with the LED...
Demonstration circuit 976 is a Quadruple High Power LED Driver in Buck Mode featuring the LT3476EUHF. The LT3476 is a quad output DC/DC converter designed to operate as a current source for...
Demonstration circuit 1102 is a Quadruple High Power LED Driver with Ballaster in Buck Mode featuring the LT3476 and LT3003. The demo board steps down PVIN to a proper level in order to generate...
Demonstration circuit 923 features the LT®3475 dual step-down 1.5A LED driver in a 16-lead TSSOP thermally enhanced package. The demonstration circuit is designed to drive two 1.5A LEDs on ...
Demonstration circuit 1315 features the LT®3475-1 dual step-down 1.5A LED driver in a 16-lead TSSOP thermally enhanced package. The demonstration circuit is designed to drive two 1.5A LED...
Demonstration circuit 842 features the LT®3474 constant frequency step-down converter in a compact 16-lead TSSOP thermally enhanced package. The demonstration circuit is designed to drive a...
Demonstration circuit 1309 features the LT3474-1 36V step-down 1A LED driver. The demonstration circuit is designed to drive a string of 1A LEDs from a high input voltage. The high switching...
Demonstration circuit DC915 features LT3466-1 high efficiency white LED driver and step-up converter. There is one LED driver output for 8 WLEDs and 2 normal outputs for LCD.
Demonstration circuit 723 features the LT®3466 dual high efficiency white LED driver. There are two LED driver outputs on DC723. Vout1 drives 10 LEDs and Vout2 drives 7 LEDs in series with...
Demonstration circuit 637 features the LT®3465 and LT®3465A constant-current white LED drivers in small SOT23 ThinSOT packages. The demo board is designed to demonstrate high efficiency...
Demonstration circuit 994 features the LT3003 three channel LED ballaster with PWM in a 10-lead MSOP thermally enhanced MSE package. The demonstration circuit is designed to ballast three channels...
Demonstration circuit 507 features the LT1937 constant current white LED driver in a small SC70 package. The demo board consists of two circuits: an efficiency circuit designed to demonstrate high...
Demonstration circuit 484 features the LT1937 constantcurrent white LED driver in a small SOT23 ThinSOT package. The demo board is designed to demonstrate the high efficiency performance and the...
Demonstration circuit 780A is a constant-current 1.4MHz white LED driver featuring the LT®1618. The board is optimized for 3.5V LED forward voltage output at 320mA load current and a single...
Demonstration circuit 1816A is an off-line isolated flyback LED driver featuring LT®3799-1. The demo board provides a single constant current output of 3A over an LED string voltage from 22V...
Demonstration circuit 1744A is an off-line isolated flyback converter featuring the LT®3799. The demo board is designed to drive a single LED from an input voltage range of 90V AC to 270V AC....
Demonstration circuit 1595A is an off-line isolated flyback converter featuring LT3799. The demo board is designed to drive a 20V nominal LED string at 1A from an input voltage range of 90VAC to...
Demonstration circuit 1327B is a 4-Channel 120mA LED Driver with +/-1.5% Current Matching featuring the LT3599. The LT3599 is a step-up DC/DC converter designed to drive up to 4-strings of LEDs at...
Demonstration circuit 1130 is a High Current Multi- String LED Driver with Wide PWM Dimming Range featuring the LT3477 and LT3003. The demo circuit boosts VIN, between 8V and 16V, to the required ...
Demonstration circuit 841 is a constant LED current boost converter with input current and output voltage protection featuring the LT®3477. The board is optimized to drive 330mA LED arrays with...
Demonstration circuit 1470 is a High Current Synchronous Step-Down LED Driver with Three-State Control featuring the LT3743EUFD. The demo board is optimized for 20A output from a 12V input.
Demonstration circuit 1319B-A/1319B-B is a high voltage and high current LED driver controller. The VIN pin input voltage is as high as 100V, and the LED output voltage is also as high as 100V. The...
The MAX16832C evaluation kit (EV kit) demonstrates the MAX16832C hysteretic current-mode high-brightness LED (HB LED) driver IC. The MAX16832C EV kit is configured as a step-down topology with a ...
The MAX16820 evaluation kit (EV kit) demonstrates a step-down, constant-current, hysteretic controlled switching regulator for driving high-brightness LEDs (HB LEDs) using the MAX16820 controller IC....
The MAX6946 evaluation (EV) kit is an assembled and tested PCB that demonstrates the capabilities of the MAX6946 constant-current LED driver and digital I/O expander. The EV kit includes three RGB...
The MAX6966 evaluation (EV) kit is an assembled and tested PCB that demonstrates the capabilities of the MAX6966 constant-current LED driver and port-expander I/Os. The EV kit includes three RGB...
The MAX16818 evaluation kit (EV kit) is a fully assembled and tested surface-mount printed-circuit board (PCB) designed to evaluate the MAX16818 pulse-width modulation (PWM) LED driver controller in...
The evaluation board (EB) contains a LX1996 white LED back light controller, a LX1972 light sensor interface and provides a DC input for analog or internal digital dimming. Customer can select...
The LX1994 Evaluation Board (EB) is available from Microsemi for evaluating the performance of the LX1994 LED driver integrated circuit and the LX1970 light sensor. (See picture 1) The combination...
The LX1992 is a compact high efficiency step-up boost controller for driving white or color LEDs in backlight or frontlight systems and offers designers maximum flexibility with respect to...
The LX1995 Evaluation Board (EB) is available from Microsemi for evaluating the performance of the LX1995 LED driver integrated circuit. (See picture 1) The EB contains a small amount of support...
The LX1745 is a compact high efficiency step-up boost regulator for driving white or color LEDs in LCD lighting applications while supplying the necessary LCD bias voltages with an additional two...
The LX1993 is a high efficiency step-up boost converter that features a psuedo-hysteretic pulse frequency modulation topology for driving white or color LEDs in backlight or frontlight systems.
The LX1744 is a compact high efficiency step-up boost regulator for driving white or color LEDs in LCD lighting applications while supplying the necessary LCD bias voltage with an additional...
The LX1991 six channel current sink driver is ideal for controlling brightness of high quality dimmable LED’s. The evaluation board demonstrates how this low cost bipolar IC enables precise...
The LX1990 is a dual output current sink optimized for driving light emitting diodes. The evaluation board demonstrates how this low cost bipolar IC enables precise current regulation in LED...
The LX2202 Linear Battery Charger is a multi-state (2 stage) Li-Ion battery charger (Constant current / Constant voltage) that is designed to minimize battery charge time (even from current...
The MP4690 is a MOSFET based smart bypass for LED open protection, which provides a current bypass in the case of a single LED fails and becomes an open circuit. When the LED heals...
The EV4688DN-00A is an evaluation board for high power LED driver. It is implemented by MP4688DN, an integrated Buck white LED driver which is suitable for automotive, industry...
The EV4021A-S-02A Evaluation Board is designed to demonstrate the capabilities of MP4021A. The MP4021A is a primary-side-control offline LED lighting controller which can achieve ...
The EV4021A-S-01B Evaluation Board is designed to demonstrate the capabilities of MP4021A. The MP4021A is a primary-side-control offline LED lighting controller which can achieve ...
The EV4021A-S-00T Evaluation Board is designed for driving a nominal LED string voltage of 50V at 0.3A from universal input (85VAC-265VAC). The LED driver uses the MP4021A.
The EV4012DS-00A Evaluation Board is designed to demonstrate the capabilities of MPS’ MP4012DS for TV backlighting applications. MP4012DS is a current mode controller...
The EV3412EJ-00A is an evaluation board for the MP3412, a synchronous step-up WLED driver with true output load disconnection function. The EV board is designed for driving one...
The EV24894GJ-00A is an evaluation board for the MP24894GJ, a high-efficiency step-down controller. It is designed to function in continuous current mode to power LEDs of...
The EV24893DJ-00A is an evaluation board for the MP24893DJ, a step-down converter designed in continuous current mode for driving the high brightness LEDs from wide input...
The EV2489DQ-00A is an evaluation board for the MP2489DQ, a step-down converter designed in continuous current mode for driving the high brightness light emitting diodes (LEDs)...
The EV2488DQ-00A is an evaluation board for the MP2488DN, a step down converter designed for driving up to 10 white LEDs in series with 330mA current. The MP2488 is a peak current...
The EV2487DN-00A is an evaluation board for the MP2487DN, a step down converter designed for driving up to 10 white LEDs in series with 330mA current. The MP2487 is a peak current...
The MP2483 is a 55V, 2.5A, white LED driver suitable for either step-down or inverting step up/down applications. It achieves 2.5A peak output current over a wide input supply...
The MP2483 is a 55V, 2.5A, white LED driver suitable for either step-down or inverting step up/down applications. It achieves 2.5A peak output current over a wide input supply...
The EV2481DH-01A is a Buck-Boost converter evaluation board for the MP2481DH, a wide input step-up/down converter designed for driving up to 27 white LEDs. The EV board parameters...
The EV2481-H-00A is a Buck converter evaluation board for the MP2481, a wide input step-down converter designed for driving high-power white LEDs with up to 1A capability.
The EV2480DN-00A Evaluation Board is designed to demonstrate the capabilities of MP2480DN. The MP2480 is step-down switching regulator to deliver a constant current of up to 3A for...
The MP24183 is a 55V, 1A, white LED driver suitable for either step-down or inverting step‑up/down applications. It achieves 1A peak output current over a wide input supply range...
The CCRGEVB is an evaluation board used to demonstrate some very simple, elegant, and cost effective solutions using ON Semiconductor's Constant Current Regulator. The board is divided into four...
The NCV7680-NCV3163 Evaluation Board includes both an NCV7680 (octal driver) and NCV3163 (Boost Regulator). The NCV3163 allows for an increased number of LEDs per NCV7680 output by boosting the...
The Evaluation Board includes both an NCV7680 (octal driver) and NTD2955 (FET). A switch on the board allows the user to evaluate functionality with and without the FET.
The NCP5612 product is a dual output LED driver dedicated to the LCD display backlighting.The built-in DC-DC converter is based on a high efficient charge pump structure with operating mode 1x and...
The NCP5603 is an integrated circuit dedicated to the medium power White LED applications. The power conversion is achieved by means of a charge pump structure, using two external ceramic...
This demo board demonstrates the overall NCP5030 capabilities and offers very easy current programming. The output current is fully configurable via the usage of 4 external resistors and...
The NCP5006 is a high efficiency boost converter operating in current loop, based on a PFM mode, to drive White LEDs. The current mode regulation allows a uniform brightness of the LEDs. The chip...
The NCP5005 is high efficiency boost converter operating in current loop, based on a PFM mode, to drive White LED. The current mode regulation allows a uniform brightness of the LEDs. The chip has...
The NCP3066 is a monolithic switching regulator designed to deliver constant current for powering high brightness LEDs. The device has a very low feedback voltage of 235 mV (nominal) which is used...
The NCP3066 is a monolithic switching regulator designed to deliver constant current for powering high brightness LEDs. The device has a low feedback voltage of 235 mV which is used to regulate the...
The NCP3066 is a monolithic switching regulator designed to deliver constant current for powering high brightness LEDs. The device has a low feedback voltage of 235 mV which is used to regulate the...
The NCP3066 is a monolithic switching regulator designed to deliver constant current for powering high brightness LEDs. The device has a very low feedback voltage of 235 mV (nominal) which is used...
The NCP3065 is a monolithic switching regulator designed to deliver constant current for powering high brightness LEDs (HBLED). The device has a very low feedback voltage of 235 mV (nominal) which...
The NCP3065 is a monolithic switching regulator designed to deliver constant current for powering high brightness LEDs (HBLED). The device has a very low feedback voltage of 235 mV (nominal) which...
This circuit is intended for driving high power LEDs.It is designed for such wide input nominal 12 Vdc applications as automotive and low voltage lighting (12 Vdc/12 Vac). An optional dimming PWM...
This circuit is intended for driving high power LEDs. It is designed for such wide input nominal 12 Vdc applications as automotive and low voltage lighting (12 Vdc/12 Vac). An optional dimming PWM...
The NCP3065 is a monolithic switching regulator designed to deliver constant current for powering high brightness LEDs (HBLED). The device has a very low feedback voltage of 235 mV (nominal) which...
This reference document describes a built and tested, GreenPoint® solution for a 3 to 5 W LED driver MR16 LED replacement. The circuit...
The NCP3065 is a monolithic switching regulator designed to deliver constant current for powering high brightness LEDs (HBLED). The device has a very low feedback voltage of 235 mV (nominal) which...
The NCP3063 Series is a higher frequency upgrade to the popular MC34063A and MC33063A monolithic DC-DC converters. These devices consist of an internal temperature compensated reference,...
The NCP3063 Series is a higher frequency upgrade to the popular MC34063A and MC33063A monolithic DC-DC converters. These devices consist of an internal temperature compensated reference,...
The NCP3063 Series is a higher frequency upgrade to the popular MC34063A and MC33063A monolithic DC-DC converters. These devices consist of an internal temperature compensated reference,...
This demo board illustrates the NCL30100 in a single-sided PCB layout. The board does have a low voltage AC bridge rectifier to support applications like outdoor landscape lighting and low...
This demo board illustrates the NCL30100 in a form factor suitable to be embedded in the base of an MR16 LED light bulb. In this case the dual sided PCB incorporates a low voltage AC rectifier...
The NCL30001LEDGEVB is a power factor corrected isolated single stage LED Driver intended for applications range from 40 - 100W that require a direct constant current output. The board is set up...
The board is designed to provide 350 mA of constant current and drive up to 15 W of LEDs in a single string. Closed loop regulation of the LED current is achieved which results in accurate ...
The board is designed to provide 350 mA of constant current and drive up to 15 W of LEDs in a single string. Closed loop regulation of the LED current is achieved which results in accurate current ...
The board is designed to provide 350 mA of constant current and drive up to 15W of LEDs in a single string. Closed loop regulation of the LED current is achieved which results in accurate current ...
The evaluation board contains one CAT4104 in a typical application circuit. Four test points labeled T4 through T7 are available to connect the cathode side of an LED string to the CAT4104.
The evaluation board contains one CAT4103 in a typical application circuit driving a RGB LED. The six pin header connector (K1) and receptacle (K2) allows for easy cascading of multiple boards....
The evaluation board contains one CAT3649 in an application circuit driving a total of six LEDs and one NOA1211. The Ambient Light Sensor is connected to the LED driver via the C8051F321...
The CAT3637 is a high efficiency Quad-Mode fractional charge pump LED driver. This device is designed to drive up to six white LEDs in parallel up to 30 mA. The LED brightness is programmable...
The board contains the CAT3626 in a typical application circuit, driving 2 RGB LEDs or 6 white LEDs. The CAT3626 is controlled through the I2C serial interface using an 8−bit...
The NCL30105 is a peak current controlled fixed off time buck controller designed for LED driver applications. It is optimized to operate in deep continuous conduction mode eliminating the need for...
This is a fully isolated up to 60 W, 90-265 Vac off-line, power factor corrected, constant current LED driver using ON Semiconductor's new NCL30051 two-stage controller. This controller contains...
The evaluation board contains one CAT4101 in a typical application circuit. A six pin header receptacle is available to connect strings of LED modules.
The purpose of this evaluation board is to demonstrate the operation of the NUD4001 device for applications where the voltage difference between the input voltage and the LED's voltage is small...
The evaluation board contains a CAT4137 DC-DC boost converter and an array of white LEDs. As configured, the board circuit is set to drive up to 5 white LEDs in series.
The CAT4139 is a DC/DC step-up converter that delivers an accurate constant current ideal for driving LEDs. Operation at a fixed switching frequency of 1MHz allows the device to be used with small...
The CAT4240 is a DC/DC step-up converter that delivers an accurate constant current ideal for driving LEDs. Operation at a fixed switching frequency of 1MHz allows the device to be used with small...
The evaluation board contains a CAT4238 DC-DC boost converter in a typical application circuit. As configured, the board circuit is set to drive up to 10 white LEDs in series. The user can chose...
The evaluation board contains a CAT4237 DC-DC boost converter and an array of white LEDs. As configured, the board circuit is set to drive up to 8 white LEDs in series.
The evaluation board contains the CAT4134 in a typical application circuit, driving up to two strings of three white LEDs, camera flash in series (FL1 to FL6).
The CAT4106 DC/DC converter is capable of driving up to 4 strings of LEDs with tight matching. This device is designed to drive LED strings up to 36 V. The LED brightness is set by a single...
The CAT4201 is a high efficiency step-down LED driver from ON Semiconductor. This device is designed to drive high brightness LEDs up to 350mA from a power supply up to 28V.
This design is an engineering report describing a PFC power supply utilizing a HiperPFS PFS714EG integrated PFC controller. This power supply is intended as a general purpose evaluation platform...
This design is an engineering report describing a PFC power supply utilizing a HiperPFS PFS708EG integrated PFC controller. This power supply is intended as a general purpose evaluation platform...
This engineering report describes a 48 V, 150 W reference design power supply for 90 VAC - 265 VAC LED street lights which can also serve as a general purpose evaluation board for the combination...
Reference Design Report for a 150 W LLC High-Voltage DC-DC Resonant Converter Using HiperLCSTM LCS702HG
This is an engineering report describing both a buck and a buck-derived power supply utilizing a LNK304DN device that provides two output voltages.
Reference Design for a 5 W Dimmable Power Factor Corrected LED Driver (Non-Isolated) Using LinkSwitchTM-PL LNK457DG
Reference Design for a 1.1 W Power Factor Corrected LED Driver (Non-Isolated) Using LinkSwitchTM-PL LNK454DG
Reference Design Kit for 4.5 W Power Factor Corrected LED Driver (Non-Isolated Buck Boost) Using LinkSwitchTM-PL LNK458KG
This design describes a high power-factor corrected dimmable LED driver designed to drive 21 V at 0.33 A from an input voltage range of 90 VAC to 265 VAC. The LED driver utilizes the LNK403EG from...
This design describes a high power factor (PF) TRIAC dimmable LED driver designed to drive a nominal LED string voltage of 28 V at 0.5 A from an input voltage range of 90 VAC to 265 VAC. The LED...
The LinkSwitch-PH monolithically integrates the 725 V power MOSFET and controller. The controller consists of an oscillator, PWM, 6 V regulator, BYPASS pin programming functions, over-temperature...
LinkSwitch-TN is specifically designed to replace all linear and capacitor-fed (cap dropper) non-isolated power supplies in the under 360 mA output current range at equal system cost while...
The best way to power LEDs is to control the forward current in order to achieve good matching of light output. LED manufacturers specify the characteristics (such as lumens, beam pattern, color)...
The LM3463 is a 6-channel linear LED driver with Dynamic Headroom Control (DHC) designed to drive six strings of high brightness LEDs at maximum supply voltage up to 95V. Each output channel of the...
The LM3509SD evaluation board is set-up to drive 2 strings of 5 white LEDs (OSRAM, LW_M67C, VF = 3.6V at 20mA). These are set-up with 5 LEDs in the MAIN string and 5 LEDs...
The LM3508 is a synchronous step-up Dc/Dc converter deisgned for white LED applications. The evaluation board is set up to drive 4 standard VF white LEDs from a 2.7V to 5.5V input supply.
The LM3502/03 evaluation board is a working demonstration of a step up DC-DC converter. The LM3502/03 can drive up to 10 white LEDs.
A high efficiency synchronous step-up DC/DC converter with analog brightness control designed for white LED applications.
The LM3503 is a white LED driver for lighting applications. For dual display backlighting applications, the LM3503 provides a complete solution. The LM3503 contains two internal white LED current...
A high efficiency synchronous step-up DC/DC converter with analog brightness control designed for white LED applications.
The TLC59282EVM evaluation module is a fully assembled and tested circuit for evaluating the TLC59282 16-Channel Constant Current LED Driver with 4-Channel Grouped Delay. The evaluation board is...
The TLC5929EVM evaluation module is a fully assembled and tested circuit for evaluating the TLC5929 16-Channel Constant Current LED Driver with 7-Bit Global Brightness, Power-Save, and...
The TPS61150AEVM-150 is an evaluation tool for the TPS6115x family. This EVM contains Texas Instruments TPS61150A based power solution. This is a dual channel, single Inductor Boost...
The TPS61181EVM-259 facilitates evaluation of the TPS61181 1.5 A White LED Driver for Notebooks. This IC provides a highly integrated solution for media size LCD backlight. The device has a...
The TPS61181AEVM-259 user's guide describes the characteristics, operation, and use of the TPS6118xEVM-259 evaluation module (EVM).
The WLEDEVM-260 load board contains 8 white light emitting diode (WLED) banks/strings which contain either 10 or 12 WLEDs as selected by the odd numbered jumpers (JP1, JP3, etc.). It is...
The TPS61183EVM-528 evaluation module is a fully assembled and tested circuit for evaluating the TPS61183 adjustable WLED driver IC. If WLEDs are needed for connection to the evaluation module,...
The TPS60255EVM-262 facilitates evaluation of the TPS60255 high efficiency, constant frequency charge pump DC/DC converter. The TPS60255 contains a 1x/1.5 x mode charge pump that drives three...
The TPS60251EVM-192 is an evaluation module for the TPS60251 high efficiency charge pump DC/DC converter for WLED drivers.
The TPS75105EVM-174 evaluation module (EVM) helps designers evaluate the operation and performance of the TPS75105 low-dropout linear regulator (LDO), two-bank LED driver with PWM dimming.
The TPS75105DSKEVM-529 evaluation module is a fully assembled and tested circuit for evaluating the TPS75105 low dropout, two-bank LED Driver. The TPS75105DSKEVM-529 drives 4 LEDs at a constant 5mA...
The Texas Instruments TPS60230EVM-047 evaluation module (EVM) helps designers evaluate the operation and performance of the TPS60230. The TPS60230 is an efficient charge-pump-based current sink...
The Texas Instruments TPS60231EVM-047 evaluation module (EVM) helps designers evaluate the operation and performance of the TPS60231. The TPS60231 is an efficient charge-pump-based current sink...
The TPS40210EVM evaluation module (EVM) is a fixed frequency (600kHz) non-synchronous boost converter providing fixed 24.0-V output at up to 2A from a 12V input bus. The EVM is designed to start up...
This TPS61199EVM-598 contains the Texas Instruments TPS61199, a WLED power solution providing up to eight independently regulated current outputs using a single inductor step-up (boost) converter.
The TPS61185EVM-335 is a fully assembled and tested circuit for evaluating the TPS61185 Adjustable, 2A WLED Driver IC. If WLEDs are not available for connection to the EVM, the WLEDEVM-260 board...
The TPS61166EVM-446 facilitates evaluation of the TPS65166 boost converter for fast on/off WLED driver.
The TPS61059EVM-141 is an evaluation tool for the TPS61058 and TPS61059 white LED Flashlight driver. It is a high power Boost Converter, driving a single, high power white LED. The main Application...
The TPS61054EVM-350 facilitates evaluation of the TPS61054 700mA High Power White LED Driver with standard Logic Interface in the chipscale (YZG) package.
The TPS61054EVM-273 facilitates evaluation of the TPS61054 high power white LED driver, 2 MHz synchronous boost converter IC in the QRN (DRV) package.
The TPS60250EVM-185 is an evaluation module for the TPS60250 high efficiency charge pump DC/DC converter for WLED drivers.
The TLC59116F is an I2C bus-controlled, 16-channel LED driver that is optimized for red/green/blue/amber (RGBA) color mixing and backlight application for amusement products.
The LM3549 is a high power LED driver with up to 700mA output current. It has three constant current LED drivers and a buck boost SMPS for driving RGB LEDs with high efficiency. LED drivers are...
The demo board included in this shipment converts 2.7V to 5.5V input, and illuminates a 320 mA HB/OLED using the LM3410X 1.6MHz LED driver switching converter.
This evaluation board showcases the LM3410X as a boost LED driver. It is designed to drive four, on-board LEDs (VOUT = 11.4V) in series at an average LED current (ILED) of...
The Evaluation Board included in this shipment converts 2.7V to 5.5V input, and illuminates four 50mA LEDs in series using the LM3410X 1.6MHz LED driver switching converter.
The Evaluation Board included in this shipment converts 2.7V to 5.5V input, and illuminates four 50mA LEDs in series using the LM3410X 1.6MHz LED driver switching converter.
This evaluation board showcases the LM3409HV PFET controller for a buck current regulator.
This demonstration board showcases the LM3409 PFET controller for a buck current regulator.
The LM3407 evaluation board contains a Pulse-Width-Modulation (PWM) floating buck converter with an integrated N-Channel power MOSFET and is designed to provide a constant current output for...
The LM3404/04HV is a buck regulator derived controlled current source designed to drive a series string of high power, high brightness LEDs (HBLEDs).
The LM3404/04HV are buck regulator derived controlled current sources designed to drive a series string of high power, high brightness LEDs (HBLEDs) at forward currents of up to 1.0A (LM3404/04HV).
The LM3402/02HV and LM3404/04HV are buck regulator derived controlled current sources designed to drive a series string of high power, high brightness LEDs (HBLEDs).
LM2704, Micropower Step-Up DC/DC Converter with 550mA Peak Current Limit
LM2703, Micropower Step-Up DC/DC Converter with 350mA Peak Current Limit
The TPS92001EVM-645 is a fully assembled and tested circuit for evaluating the TPS92001 General Purpose PWM Controller with 10V Turn-on Threshold for LED Lighting.
The Texas Instruments TPS92001EVM-628 evaluation module (EVM) helps designers evaluate the performance of the TPS92001 General Purpose PWM Controller with 10V Turn-on Threshold for LED Lighting.
The TPS61310EVM-638 Evaluation Module (EVM) demonstrates the Texas Instruments TPS61310 LED camera flash and video light driver with I2C interface.
The TPS92310-xxFB evaluation module is a constant current output LED driver supporting 5W to 8W applications.
This demonstration board highlights the performance of aLM3448 non-isolated LED driver solution that can be used topower a single LED string consisting of eight to twelve series connected LEDs...
This demonstration board highlights the performance of a LM3448 based Flyback LED driver solution that can be used to power a single LED string consisting of seven to eleven series connected LEDs...
This demonstration board highlights the performance of a LM3448 based Flyback LED driver solution that can be used to power a single LED string consisting of seven to eleven series connected LEDs...
The TPS92070EVM-682 Evaluation Module (EVM) is a fully assembled and tested circuit for evaluating the Dimmable Quasi-Resonant LED Lighting Controller.
The TPS92310-xxFB evaluation module is a constant current output LED driver supporting 5W to 8W applications.
The TPS92070EVM-648 is designed to demonstrate the TPS92070 Dimmable Quasi-Resonant LED Lighting Controller in a typical LED driver application.
The TPS62260EVM-229 facilitates evaluation of the TPS62260 2.25 MHz, 600 mA step-down converter in 2x2SON/TSOT-23 package.
The LED DC/DC Developer's Kit includes all of the hardware and software to start experimenting and developing a digitally controlled LED DC/DC system. The kit is based on the Piccolo...
The C2000 Power Line Modem Developer's Kit enables easy development of software based Power Line Communication (PLC) modems. The kit includes two PLC modems based on the C2000 F28335 controlCARD...
The TPS40211EVM-352 evaluation module (EVM) is a fixed frequency, (300 kHz), non-synchronous boost converter providing fixed 700-mA output at 20 V to 35 V from a 8-V to 18-V input source. The EVM...
The TPS92210EVM-647 evaluation module is a fully assembled and tested circuit for evaluating the TPS92210 Natural PFC LED Lighting Driver Controller. The evaluation module demonstrates the TPS92210...
The TPS92210EVM-613 evaluation module is a fully assembled and tested circuit for evaluating the TPS92210 Natural PFC LED Lighting Driver Controller. The evaluation module demonstrates the...
The TPS61160EVM-243 demonstrates the TPS61160 White LED Driver with Digital and PWM Brightness Control. With a 40-V rated integrated switch FET, the TPS61160 is a boost converter that drives up...
This EVM uses the TPS92010 high efficiency offline LED lighting driver controller. The power topology is a quasi resonant mode flyback. This makes for a cost competitive solution. This TPS92010...
The TPS92010EVM-631 is a fully assembled and tested circuit for demonstrating the TPS92010 Controller in a 230VAC light bulb replacement design that is TRIAC dimmable. The TPS92010EVM-631...
The UCC28810EVM-002 is a constant current non-isolated power supply for LED lighting applications. It will convert universal mains (90 VRMS to 264 VRMS) to a 0.9-A constant current into a 100-W...
The UCC28810EVM-003 is an 110-W offline AC-to-DC LED current driver with power factor correction. This design utilizes a three stage approach with a universal input boost PFC stage, a low-side buck...
The TPS61165EVM-283 facilitates evaluation of the TPS61165 High Brightness White LED Driver. With its 40 V rated integrated switch FET, the TPS61165 is a boost converter to driver up to...
The TPS61500EVM-369 facilitates evaluation of the TPS61500 High Brightness LED Driver IC.
The TPS61150EVM-150 is an evaluation tool for the TPS6115x family. This is a dual channel, single Inductor Boost Converter with two regulated current outputs for driving white LEDs.
The TPS61140EVM-157 is an evaluation tool for the TPS6114x family. This is a dual channel, single Inductor Boost Converter which is ideal for driving the OLED sub-display and white LED backlight...
The TPS62052EVM-234 is an evaluation tool for the TPS62052 95% efficient, 800-mA inductive step-down converter in MSOP-10, which supplies a fixed voltage of 1.5V from a 2.7-V to 10-V input. The ...
The TPS62050EVM-234 is an evaluation tool for the TPS62050 95% efficient, 800-mA inductive step-down converter in MSOP-10, which can supply voltages down to 0.7V from a 2.7-V to 10-V input. The ...
The TPS61070EVM-062 is an evaluation tool for the TPS61070 inductive step-up converter IC.
The TPS61020EVM-025 is an evaluation tool for the TPS61020 inductive step-up converter in QFN-10 package which can supply voltages up to 5.5V from a 0.9-V to 6.5-V input featuring an LDO...
The TPS61195EVM-460 is a fully assembled and tested circuit for evaluating the TPS61195 Adjustable, 8-Channel White LED Driver IC. If LEDs are not available for connection to the evaluation module,...
The TL4242EVM demonstrates the TL4242 IC configured to supply programmable constant current ≤500mA to LEDs on the output.
The TPS63000EVM-148 is an evaluation tool for the TPS63000 device family. It is a 96% efficient Buck/Boost Converter with an input range of 1.8 V to 5.5 V, optimized to run from a...
The TPS61042EVM-226 is an evaluation tool for the TPS61042 inductive boost converter in 3x3mm2 QFN that can supply voltages up to 28V from input voltages in the range of 1.8V to 6V. The EVM is...
The TPS61045EVM-231 is an evaluation tool for the TPS61045 inductive boost converter in 3x3mm2 QFN that can supply voltages up to 28V from input voltages in the range of 1.8V to 6V. The EVM is...
The TPS61040EVM-002 is an evaluation tool for the SOT-23 TPS61040 inductive boost converter which can supply voltages up to 28V from input voltages in the range of 1.8V to 6V.
The TPS61040EVM-001 is an evaluation tool for the SOT-23 TPS61040 inductive boost converter which can supply voltages up to 28V from input voltages in the range of 1.8V to 6V.
The TPS61080EVM-147 evaluation module facilitates evaluation of the TPS61080 IC configured as a boost converter regulating output voltage. The evaluation module can be easily reconfigured to...
The TPS61050EVM-269 facilitates evaluation of the TPS61050 1.2 A High Power White LED Driver IC in the BGA (YZG) package.
The Texas Instruments TPS61061EVM-091 evaluation module (EVM) helps designers evaluate the operation and performance of the TPS6106x family of white LED power supply ICs. The TPS6106x family are...
The TPS61161EVM-243 facilitates evaluation of the TPS61161 White LED Driver with Digital and PWM Brightness Control. With its 40 V rated integrated switch FET, the TPS61161 is a boost converter...
The TLC59116 is an I2C bus-controlled, 16-channel LED driver that is optimized for red/green/blue/amber (RGBA) color mixing and backlight application for amusement products.
The TPS61050EVM-215 is an evaluation module for the TPS61050 1.2 A High Power White LED Driver with I²C Compatible Interface. The TPS61050 is based on a high-frequency...
The TPS62260LED-338 evaluation module controls the color and brightness of a lamp or runs an automatic color light animation program. The color is generated by three LEDs (red, green and blue)....
Product Showcase
The LX1745 is a compact high efficiency step-up boost regulator for driving white or color LEDs in LCD lighting applications while supplying the necessary LCD bias voltages with an additional two...
The MAX6966 evaluation (EV) kit is an assembled and tested PCB that demonstrates the capabilities of the MAX6966 constant-current LED driver and port-expander I/Os. The EV kit includes three RGB...
The TPS75105DSKEVM-529 evaluation module is a fully assembled and tested circuit for evaluating the TPS75105 low dropout, two-bank LED Driver. The TPS75105DSKEVM-529 drives 4 LEDs at a constant 5mA...
Reference Design Kit for 4.5 W Power Factor Corrected LED Driver (Non-Isolated Buck Boost) Using LinkSwitchTM-PL LNK458KG
The MP2483 is a 55V, 2.5A, white LED driver suitable for either step-down or inverting step up/down applications. It achieves 2.5A peak output current over a wide input supply...
The best way to power LEDs is to control the forward current in order to achieve good matching of light output. LED manufacturers specify the characteristics (such as lumens, beam pattern, color)...
The NCL30001LEDGEVB is a power factor corrected isolated single stage LED Driver intended for applications range from 40 - 100W that require a direct constant current output. The board is set up...
MXHV9910 is a low-cost, high-brightness (HB) LED driver manufactured using Clare's high-voltage BCDMOS on SOI process. The driver has internal circuitry that allows it to operate from a universal...
Demonstration circuit 1511A-A features the LTM®8042 which is a complete 1A μModule LED driver.